BNC

Notes:
1. Use "U" designator prefix for 75 ohm version.
2. Cable group designators will be added to replace the "x" suffix. To find your cable group...

wrench crimp	tool crimp	solder termination
tool crimp, right angle	tool crimp, 45 degree

UPL2000

HDTV Ready
True 75 Ohm
Digital BNC

tool crimp

UPL2000-D1 for Belden 1855A & Comm/Scope 7538
UPL2000-D2 for Belden 1505A & Gepco VPM2000
UPL2000-D3 for RG-59U
UPL2000-D4 for Belden 1694A & Gepco VPM2001
UPL2000-D5 for Belden 7731A & Gepco 5906
UPL2000-D6 for Belden 1695A

Jacks:

Notes:
1. Use "U" designator prefix for 75 ohm version.
2. Cable group designators will be added to replace the "x" suffix. (See above.)

solder termination, front mount	cable jack, wrench crimp	cable jack, tool crimp	solder termination, rear mount, insulated
wrench crimp, rear mount, insulated	tool crimp, rear mount, insulated	solder termination, front mount, insulated	feed-through, insulated
feed-thru, non-insulated	wrench crimp, rear mount	tool crimp, rear mount	tool crimp, rear mount
circuit board jack, 180 degree	circuit board jack, right angle	circuit board jack, bulkhead style, right angle	Help:

Miscellaneous

Note: Use "U" designator prefix for 75 ohm version.

Barrel connector

Right angle adapter

Terminators are
detailed in the
coax terminator page.

Tools

Cable Cutting Tool:

	Description	TEI P/N
	Designed to cut coax cable without compressing the dielectric or damaging the center conductor.	700-0024

Cable Strippers, Manual:

	Wrench Crimp Connectors: Tool Only - Requires blade below Cassette - Blade for wrench crimp BNC	ST1 STC-W
	Tool Crimp Connectors: Tool Only - Requires blade below Cassette - Blade for tool crimp BNC	ST1 STC-F

Cable Strippers, Automatic:

Kits	Kits (BWS) include Drive, Ni-Cad battery pack, 1 cutter head, DC Adapter, AC Charger and a carrying case. Part numbers are specified by combining the tool part number with the proper cassette. (Example: BWS/C26T3D for DC tool and cassette to strip RG59 cable to accept TEI tool crimp connectors.)
BWS AWS	DC Driver only - requires cutter head below. AC Driver only - requires cutter head below
Cutter Head Guide:
Cable O.D.	2-Blade Cut (Wrench Crimp)	3-Blade Cut (Tool Crimp)
.070-.110 .160-.215 .190-.230 .235-.270 .300-.430 .110-.160 .271-.305	C26T2A C26T2B C26T2C C26T2D C26T2E C26T2I C26T2U	C26T3A C26T3B C26T3C C26T3D C26T3E C26T3I C26T3U

Tool Crimp 75 Ohm Connectors, Center Contact Crimp Tool:
(Note: Not for use on 50 ohm connectors.)

	To Crimp These Connectors: BNC/TNC/PL11 (Grn/Yellow) BNC/TNC (Yellow)	Use 12-Point Crimp Tool: 010-0098 (Recommended) 010-0080
	or To Crimp These Connectors: BNC/TNC plugs (Red) PL11 Patch Plugs (Blue) BNC Plug/PL11 (Red/Blue) BNC Jack (Blue)	Use Octadent Crimp Tool: 010-0055 010-0070 010-0097 010-0088

Tool Crimp, Ferrule Crimp Tool:

CT4L (Black w/ longer ergonomic handle
CT4 (Blue Handle)
CT3 (Blue Handle)

NOTE: Also select a crimp die below.

Tool Crimp, Ferrule Crimp Dies
NOTE: Use with CT4L, CT4 or CT3 tool.

Crimp Die	A Cavity	Embosses	B Cavity	Embosses
CD3-1	.213	1A	.178	1B
CD3-2	.324	2A	.255	2B
CD3-3	.344	3A	.290	3B
CD3-5	-	-	.197	5B
CD3-11	.255	734	.178	735
CD3-15	.255	4	.178	5
CD3-17	.255	255	.178	178
CD3-18	.324	324	.178	178
CD3-19	.178	178	.255	255
CD6-1	.324	-	.360	-

May we recommend...
For Use Crimp Die , Cavity , Hex
(See Note 2 at top of form for assistance with determining cable group designators.)

Wrench Crimp, Assembly Tools

	Use on...	TEI Part Number
	BNC/TNC/N	AT1

BNC Tester, 75 Ohm Plugs

Designed to test for proper assembly of BNC plugs to coax cables. Tests for center contact pin height and for continuity and isolation.

75 Ohm, BNC Plug - Order Part Number 010-0133

Plugs: