F Series

Notes:
1. All connectors are 75 ohms.
2. Cable group designators will be added to replace the "x" suffix. To find your cable group...

wrench crimp

wrench crimp,
right angle

PLR130SC-x
nophoto.gif (9064 bytes)

Right angle F plug

One-piece,
tool crimp

Notes:
1. All connectors are 75 ohms.
2. Cable group designators will be added to replace the "x" suffix. (See above.)

wrench crimp

solder termination,
front mount

Help:

Adapter,
F plug to BNC jack

Adapter,
F jack to BNC plug

Terminators are
offered in the
coax terminator page.

	Description	TEI P/N
	Designed to cut coax cable without compressing the dielectric or damaging the center conductor.	700-0024

	Wrench Crimp Connectors: Tool Only - Requires blade below Cassette - Blade for wrench crimp BNC	ST1 STC-W
	Tool Crimp Connectors: Tool Only - Requires blade below Cassette - Blade for tool crimp BNC	ST1 STC-F

	Kits	Kits (BWS) include Drive, Ni-Cad battery pack, 1 cutter head, DC Adapter, AC Charger and a carrying case. Part numbers are specified by combining the tool part number with the proper cassette. (Example: BWS/C26T3D for DC tool and cassette to strip RG59 cable to accept TEI tool crimp connectors.)
	BWS AWS	DC Driver only - requires cutter head below. AC Driver only - requires cutter head below
	Cutter Head Guide:
	Cable O.D.	2-Blade Cut (Wrench Crimp)
	.070-.110 .160-.215 .190-.230 .235-.270 .300-.430 .110-.160 .271-.305	C26T2A C26T2B C26T2C C26T2D C26T2E C26T2I C26T2U

	Use on...	TEI Part Number

Note: The PL130C tool crimp connector can be stripped to industry standard dimensions and crimped with standard F-type crimp tools.