N Series

Notes:
1. Use "U" designator prefix for 75 ohm version.
2. Cable group designators will be added to replace the "x" suffix. To find your cable group...

wrench crimp

wrench crimp,
right angle

Jacks

Notes:
1. Use "U" designator prefix for 75 ohm version.
2. Cable group designators will be added to replace the "x" suffix. (See above.)

wrench crimp

solder termination,
front mount

wrench crimp,
insulated

feed-through jack

Miscellaneous

Note: Use "U" designator prefix for 75 ohm version.

adapter,
N to BNC,
Feed-through

adapter,
N to BNC,
Feed-through,
insulated

Termination,
no chain

Terminators are detailed
more fully in the
coax terminator page.

Tools

Cable Cutting Tool:

	Description	TEI P/N
	Designed to cut coax cable without compressing the dielectric or damaging the center conductor.	700-0024

Cable Strippers, Manual:

	Wrench Crimp Connectors: Tool Only - Requires blade below Cassette - Blade for wrench crimp BNC	ST1 STC-W
	Tool Crimp Connectors: Tool Only - Requires blade below Cassette - Blade for tool crimp BNC	ST1 STC-F

Cable Strippers, Automatic:

	Kits	Kits (BWS) include Drive, Ni-Cad battery pack, 1 cutter head, DC Adapter, AC Charger and a carrying case. Part numbers are specified by combining the tool part number with the proper cassette. (Example: BWS/C26T3D for DC tool and cassette to strip RG59 cable to accept TEI tool crimp connectors.)
	BWS AWS	DC Driver only - requires cutter head below. AC Driver only - requires cutter head below
	Cutter Head Guide:
	Cable O.D.	2-Blade Cut (Wrench Crimp)
	.070-.110 .160-.215 .190-.230 .235-.270 .300-.430 .110-.160 .271-.305	C26T2A C26T2B C26T2C C26T2D C26T2E C26T2I C26T2U

Wrench Crimp, Assembly Tools

	Use on...	TEI Part Number
	BNC/TNC/N	AT1