Twinax/Triax Terminators & RF Caps

Interconnect Sales Group | 408.435.1920

Twinax/Triax Terminators & RF Caps
Home | Search

Configuration Options:

Terminators and RFI Caps offer options for retention chains as follows.

No chain
Brass chain, 2.5"
Brass chain, 3.0"
Brass chain, 4.0"
Brass chain, 6.0"
Brass chain, 10.0"
Nylon chain, 2.5"

Nylon chain, 3.0"
Nylon chain, 4.0"
Nylon chain, 6.0"
Nylon chain, 10.0"
Jacketed Stainless Steel Rope, 2.5"
Jacketed Stainless Steel Rope, 3.0"
Jacketed Stainless Steel Rope, 6.0"

Resistor Value: in ohms. ("S" for short)

Terminators & RFI/Dust Caps:

Parts to be capped	Description	Terminator	RFI (Dust Cap)
BJ30/CJ30 Series	TWBNC Jack	TNGT1-	RFI25-
BJ70/CJ70 Series	TRB, Jack	TNG1-	RFI75-
BJ70FL/CJ70FL	TRB, Jack	TNGFL1-	RFI75FL-
BJ70TL/CJ70TL	TRB, Jack	TNGTL1-	RFI75TL-
BJ80/CJ80	TRC, Jack	TNGL1-	RFI85-
BJ150/CJ150	TRS, Jack	TNGM1-	RFI155-
BJ150FL/CJ150FL	TRS, Jack	TNGMFL1-	RFI155FL-
BJ375/CJ375	TRT, Jack	TNT1-	RFI375-
BJ375/CJ375	TRT, Jack	TNTS1- (Safety Holes)	RFI375-
BJ380/CJ380	TRN, Jack	TNTL1-	RFI385-
BJ803/CJ803	TRC, 3-lug Jack	TNG3L1-	RFI853-
BJ3150/CJ3150	TTM, Jack	TNTM1-	RFI3155-
J72	Twinax Patch Jack	TPT-	RFI70-
J72L	Twinax Patch Jack	TPTL-	RFI70-
J152	Twinax Submin. Patch Jack	TPTWM-	RFI150-
PL30	TWBNC, Plug	TNGBJT1-	RFI21-
PL74	TRB, Plug	TNGBJTL1-	RFI77TL-
PL75	TRB, Plug	TNGBJ1-	RFI77-
PL75FL	TRB, Plug	TNGBJFL1-	RFI77FL-
PL80	TRC, Plug	TNGLF1-	RFI80-
PL80	TRC, Plug	TNGLF3L1-	RFI80-
PL380	TRN	TNTLF1-	RFI80-
PL150	Submin. Patch Plug	TJTWM-
PL155	TRS, Plug	TNGBJM1- (Bulkhead Mount)	RFI157-
PL155	TRS, Plug	TNGMF1-	RFI157-
PL155FL	TRS, Plug	TNGBJMFL1- (Bulkhead Mount)	RFI157FL-
PL155FL	TRS, Plug	TNGMFFL1-	RFI157FL-
PL3155	TTM, Plug	TNTBJM1- (Bulkhead Mount)	RFI3157-
PL3155	TTM, Plug	TNTMF1-	RFI3157-
PL350	TCM, Plug		RFI357-
PL375	TRT, Plug	TNTBJ1- (Bulkhead Mount)	RFI377-
PL375	TRT, Plug	TNTF1-	RFI377-
PL380	TRN, Plug	TNTLF1-	RFI380-
PL803	TRC, 3-lug, Plug	TNGLF3L1-	RFI803-

Note: Part Number suffix is comprised of a chain style designator and resistor value. Resistors are normally 1/8 watt for subminiature connectors, 1/2 watt for miniature and standard sizes. All carry a 1% tolerance.