Notes:
1. Use "U" designator prefix for 75 ohm version.
2. Cable group designators will be added to replace the "x" suffix. To find your cable group... Select a manufacturer Alpha Andrew AT&T Belden Brand Rex Canare Champlain Comm/Scope Essex General Gepco Gore Grumman Habia Harbour Hitachi Judd M/A Com Madison Malco Manhattan McDonnell Douglas Microdot Mil-Spec Mohawk Montrose NavSea Northern Telecom Raychem Raytheon Teledyne Tensolite Thermatics Thermax Times Trompeter

wrench crimp

tool crimp

solder termination, front mount

Jacks

Notes:
1. Use "U" designator prefix for 75 ohm version.
2. Cable group designators will be added to replace the "x" suffix. (See above.)

wrench crimp	tool crimp	solder termination, rear mount
solder termination, front mount, insulated	solder termination, rear mount, insulated	Feed-through, insulated
wrench crimp, rear mount, insulated	wrench crimp, rear mount	tool crimp, rear mount, insulated
tool crimp, rear mount	circuit board jack, right angle	Help:

Miscellaneous

Note: Use "U" designator prefix for 75 ohm version.

Barrel Connector

Terminators are offered in the coax terminator page.

Tools

Cable Cutting Tool:

	Description	TEI P/N
	Designed to cut coax cable without compressing the dielectric or damaging the center conductor.	700-0024

Cable Strippers, Manual:

	Wrench Crimp Connectors: Tool Only - Requires blade below Cassette - Blade for wrench crimp BNC	ST1 STC-W
	Tool Crimp Connectors: Tool Only - Requires blade below Cassette - Blade for tool crimp BNC	ST1 STC-F

Cable Strippers, Automatic:

	Kits	Kits (BWS) include Drive, Ni-Cad battery pack, 1 cutter head, DC Adapter, AC Charger and a carrying case. Part numbers are specified by combining the tool part number with the proper cassette. (Example: BWS/C26T3D for DC tool and cassette to strip RG59 cable to accept TEI tool crimp connectors.)
	BWS AWS	DC Driver only - requires cutter head below. AC Driver only - requires cutter head below
	Cutter Head Guide:
	Cable O.D.	2-Blade Cut (Wrench Crimp)	3-Blade Cut (Tool Crimp)
	.070-.110 .160-.215 .190-.230 .235-.270 .300-.430 .110-.160 .271-.305	C26T2A C26T2B C26T2C C26T2D C26T2E C26T2I C26T2U	C26T3A C26T3B C26T3C C26T3D C26T3E C26T3I C26T3U

Tool Crimp 75 Ohm Connectors, Center Contact Crimp Tool:
(Note: Not for use on 50 ohm connectors.)

	To Crimp These Connectors:l BNC/TNC plugs (Red) PL11 Patch Plugs (Blue) BNC Plug/PL11 (Red/Blue) BNC Jack (Blue)	Use Octadent Crimp Tool: 010-0055 010-0070 010-0097 010-0088
	or To Crimp These Connectors:l BNC/TNC  (Yellow) BNC/TNC/PL11 (Grn/Yellow)	or 12-Point Crimp Tool: 010-0080 010-0098

Tool Crimp, Ferrule Crimp Tool:

CT4L (Black w/ longer ergonomic handle CT4 (Blue Handle) CT3 (Blue Handle) NOTE: Also select a crimp die below.

Tool Crimp, Ferrule Crimp Dies
NOTE: Use with CT4L, CT4 or CT3 tool.

	Crimp Die	A Cavity	Embosses	B Cavity	Embosses
	CD3-1	.213	1A	.178	1B
	CD3-2	.324	2A	.255	2B
	CD3-3	.344	3A	.290	3B
	CD3-5	-	-	.197	5B
	CD3-11	.255	734	.178	735
	CD3-15	.255	4	.178	5
	CD3-17	.255	255	.178	178
	CD3-18	.324	324	.178	178
	CD3-19	.178	178	.255	255
	CD6-1	.324	-	.360	-

May we recommend... 
For Select Cable Group Number 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 024 025 026 027 028   Use Crimp Die , Cavity , Hex
(See Note 2 at top of form for assistance with determining cable group designators.)

Wrench Crimp, Assembly Tools

	Use on...	TEI Part Number
	BNC/TNC/N	AT1